How Can We Help?
< All Topics

Cleaning the build plate

You should clean the build plate before each print for best printing results. Printing onto a dirty build plate can lead to print not sticking, warping etc.

  1. Remove the build plate from the KODAK Portrait 3D Printer using both hands to avoid damaging it.
  2. Clean the build plate using lukewarm water and a spatula or a non-abrasive sponge. Detergent or Isopropyl alcohol can be used to remove adhesives or grease if required.
  3. Dry the build plate using a clean and dry microfiber cloth.
  4. Make sure the build plate is completely clean and dry before putting it back in.
Table of Contents