How Can We Help?
< All Topics

Removing prints from the build plate

  1. Print the part.
  2. Press Rate in order for the platform to move down
  3. Wait until the bed cools down to ambient temperature.
  4. Take out the glass out of the printer and place it on a secure surface.
  5. Use the spatula to remove the print from the glass, be careful to apply the force directly at the bottom of the print.
  6. If adhesives were used, you can use water or water/alcohol mix to help separate the print from the glass build plate.
  7. Use water and a sponge to clean the glass if necessary.
Table of Contents