How Can We Help?
< All Topics

Replacing the Air Filter

With normal use, check the air filter every six (6) months or so if replacement is required:

  1. Remove the air filter blower and cover using a Phillips screwdriver.
  2. Now you can take out the filter. Be careful not to break the filter, it’s easier than you think.
  3. Remove the packaging from your new filter and insert it in the now empty compartment in the Portrait 3D printer.
  4. Now affix the air filter blower and its cover again using a Phillips screwdriver.
warningBe careful when handling the HEPA filter. The HEPA filter can break and spill out activated carbon.
Table of Contents